Tesla Model X: Module - 2nd Row Seat - LH (Remove and Replace)
Installation
- Remove the LH 2nd row seat back cover (refer to procedure).
- Disconnect the 2 harnesses from the module.
- Remove the fasteners (x3) that secure the module to the seat
(torque 1 Nm).
- Remove the module from the vehicle.
Installation
Installation procedure is the reverse of removal, except for the
following:
Use Toolbox to update or redeploy the firmware:
- If the vehicle is not running the latest firmware, run
the "Vehicle Firmware Update" procedure.
- If the vehicle is running the latest firmware, run the
"Firmware Redeploy" procedure.