Tesla Model X: Strut - Rear Door - Primary - Forward - LH (Remove and Replace)

Tesla Model X 2015-2024 Service Manual / Closures / Strut - Rear Door - Primary - Forward - LH (Remove and Replace)

Removal

Apply protective tape onto the racetrack trim to prevent damage.
Remove the front upper rear door trim bracket (refer to procedure).
Support the rear door.

Warning: Ensure that the door is fully supported before continuing. Either have an assistant support the full weight of the door or use a pole jack.

Disconnect the primary strut harness, then release the 2 clips that secure the harness to the door.
Release the strut from the door.
Release the strut from the body.

Warning: Continue to support the door until the new strut is installed.

Installation

Installation procedure is the reverse of removal, except for the following:

Working from the front row, press and hold the B-Pillar rear door switch until the door fully cinches closed.

SEE MORE:

Assembly - Cover - Footwell - RH (Remove and Replace)

Removal Fully open the passenger door. Move the passenger seat rearward for access. Remove the RH center console closeout extension (refer to procedure). Remove the retaining clips (x2) that secure the footwell cover to the dash.

Brightwork - Upper - Rear - LH (Remove and Replace)

Remove Remove the C-Pillar applique (refer to procedure). Remove the fasteners that secure the upper brightwork (torque 4 Nm). Installation Installation procedure is the reverse of removal.