Tesla Model X: Driver Profiles
When you first adjust the driver's seat, steering yoke
position, or exterior side mirrors, the touchscreen
prompts you to create a driver profile to save these
adjustments. Your profile also saves various preferences
you make while customizing Model X. See Using Tesla Profiles to learn more about saving
profile
settings to the cloud for easy access across multiple
Tesla vehicles. If you change the position of the driver's seat, steering
yoke, or exterior side mirrors after you have saved or
chosen a driver profile, the touchscreen prompts you to
Save the new position or Restore the previously saved
position (other settings are automatically saved). To
change a setting without saving or restoring, just ignore
the prompt. NOTE: Valet mode is a built-in driver profile that limits
speed and restricts access to some Model X features
(see Valet Mode). NOTE: To stop automatic adjustments that are in
process based on a driver's profile, touch Stop on the
Driver Profile dropdown menu. Automatic adjustments
also stop if you manually adjust a seat, mirror, or the
steering yoke. Easy Entry You can define an Easy Entry setting that moves the
steering yoke and driver's seat to make it easy to enter
and exit Model X. Any driver can use the Easy Entry
setting by associating it with their driver profile. When
the Easy Entry setting is associated with a driver profile,
the steering yoke and driver's seat automatically adjust
when in Park and the driver's seat belt is unbuckled,
allowing an easy exit from Model X. When returning to
the vehicle and stepping on the brake pedal, settings
automatically adjust back to the settings used by the
most recent driver profile (or based on the key if it's
linked to a driver profile).
To use Easy Entry with a driver profile, ensure the Use
Easy Entry box is checked. WARNING: Never use Easy Entry to move the
driver's seat to the full rearward position when a
child safety seat is installed on a rear seat located
behind the driver's seat. With reduced clearance,
the movement of the seat may impact a child's
legs, cause injury, or dislodge the seat. Selecting Between Driver Profiles Driver profile settings, such as seat adjustments,
temperature preferences, navigation Recents and
Favorites, media settings, and data sharing preferences
can be saved into a Tesla Profile that is synced to every
supported vehicle under your Tesla Account. This
provides convenient access to your profile settings and
preferences across all your Tesla supported vehicles.
To set up your Tesla Profile, navigate to Driver Profile
Settings and select your Tesla Account name. You can
choose to set it up as a New Profile or copy the settings
from an existing driver profile that you were previously
using.
To set up a Tesla Profile for additional drivers, share your
vehicle with them from the mobile app and navigate to
Security > Add Driver. Their Tesla Profile will appear in
the Driver Profile settings after accepting the invitation
from their Tesla Account. For more information on
granting mobile app access, see Granting Access to a
Second Driver. NOTE: Some vehicle settings, such as seat, mirror,
steering wheel, and air vent positions are only synced
between the same vehicle models. If the seat or steering
positions do not restore as expected, touch Controls >
Service > Seat & Steering Calibration on the affected
vehicles. NOTE: Tesla Profiles are supported on vehicles with
software versions 2022.24 or higher. Your Tesla Profile will be removed from any vehicle not
associated with your Tesla Account. Saved Settings A subset of the settings that you choose to customize
your Model X are automatically saved to your driver's
profile. Once saved, a green check mark appears next to
the driver profile icon on the touchscreen. Examples of
automatically saved driver profile settings are: Linking a Driver Profile to a Key You can link a driver profile to a key (or keys) to allow
Model X to automatically select the correct driver profile
when the linked key is detected as you approach the
vehicle and open the driver's door. To link a driver profile
to a key, first ensure you are using your desired driver
profile. Touch the driver profile icon at the top of the
Controls screen. Follow the onscreen instructions to add
a phone key, key card, or key fob (see Adding and
Removing Keys). When finished, touch the
driver icon to link the key to the desired driver profile.
The name of the driver profile appears under the key to
show that it is linked.
NOTE: Model X supports up to 10 driver profiles. You can
link multiple keys to a driver profile, but you cannot link
multiple driver profiles to a single key. When Model X is in Valet mode, the following
restrictions apply: NOTE: Model X does not automatically shift when in
Valet Mode. Starting Valet Mode With Model X in Park, touch the driver profile icon at the
top of the Controls screen, then touch Valet Mode.
The first time you enter Valet mode, the touchscreen
prompts you to create a 4-digit PIN you will use to
cancel Valet mode.
When Valet mode is active, the instrument panel
displays the word Valet while the driver profile changes
to Valet Mode on the touchscreen. You can also use the mobile app to start and cancel
Valet mode (if Model X is in Park). When using the
mobile app, you do not need to enter a PIN because you
are already required to log into the app using your Tesla
Account credentials. NOTE: If the PIN to Drive setting is enabled (see PIN to
Drive), you must enter the driving PIN
before you can define or enter a Valet PIN. Once in Valet
mode, Model X can be driven without the valet needing
to enter the driving PIN. NOTE: The PIN to Drive setting is not available when
Valet mode is active. If you forget your valet PIN, reset it from inside Model X
by entering your Tesla Account credentials (which also
cancels Valet mode). You can also reset your PIN using
the mobile app. WARNING: Do not use Valet mode when towing a
trailer. The torque limitations of Valet mode can
make it difficult for Model X to pull a trailer up a
hill. Canceling Valet Mode With Model X in Park, touch the Valet Mode driver
profile icon at the top of the Controls screen, and enter
your 4-digit PIN.
When you cancel Valet mode, all settings associated
with the most recently used driver profile and climate
control settings are restored, and all features are
available. NOTE: You do not need to enter a PIN to cancel Valet
mode from the mobile app.Creating a Driver Profile
To add a new driver profile,
touch the
driver profile icon at the top of the
Controls screen. Then touch Driver Profile
Settings > Add New Driver, type the
driver's name and touch Create Profile.
Follow the onscreen instructions to save
mirror and steering wheel position to the
driver profile. Check the Use Easy Entry
checkbox if you want to save (or use
existing) Easy Entry settings in which the
driver's seat and the steering yoke are
automatically adjusted to make it easy to
enter and exit Model X.
To adjust Model X based on a
driver's
profile, touch the driver profile icon at the
top of the Controls screen. Then choose
the driver, and Model X is adjusted based
on the settings that have been saved to the
chosen driver profile. See Using Tesla Profiles to learn more about
saving profile settings to the cloud for easy
access across multiple Tesla vehicles.
Using Tesla Profiles
Valet Mode