Tesla Model X: Striker - Hood (Remove and Replace)

Tesla Model X 2015-2024 Service Manual / Closures / Striker - Hood (Remove and Replace)

Removal

Open the hood for access.
Remove the hood insulation pad, if equipped.
Mark the installed position of the striker plate to aid installation.
Remove the bolts (x2) that secure the striker to the hood (torque 20 Nm).
Remove the striker assembly.

Installation

Installation procedure is the reverse of removal, except for the following:

Adjust the striker as necessary before torquing the bolts.
Clean any witness marks from the painted surface.
Ensure proper operation of the hood.

SEE MORE:

Bluetooth Compatibility

You can use your Bluetooth-capable phone hands-free in Model X provided your phone is within operating range. Although Bluetooth typically supports wireless communication over distances of up to approximately 30 feet (nine meters), performance can vary based on the phone you are using. Befo

Lamp - Brake - High Mounted (Remove and Replace)

Removal Remove the active spoiler applique (refer to procedure). Remove the RH side liftgate trim (refer to procedure). Remove the RH catch basin cover. On the RH side of the liftgate, disconnect the high mounted brake lamp electrical connector.