Tesla Model X: Door Glass - LH - Rear - Adjust

Inboard/Outboard Adjustment

Note: The rear window is 4-way adjustable.

1. Remove the rear door trim panel (refer to procedure).
2. Loosen the nuts (x4) that secure the regulator to the door.

    

3. On the affected corner, hold the nut with an open end wrench and use an allen wrench to adjust the window inboard/outboard.

    

4. Repeat the previous step as necessary.
5. Tighten the nuts (x4) that secure the window motor/regulator assembly to the door (torque 10 Nm).
6. Reinstall the rear door trim panel. Note: If the rear window needs a fore/aft adjustment, skip to step 2 of the "Fore/Aft Adjustment" section.

1. Remove the closeout panel (refer to procedure).
2. Loosen the nut that secures the front of the window to the regulator.

   Note: Do not remove the nut.

    

3. Carefully slide the window forwards or backwards as necessary.

Caution: Take care not to damage component(s).

4. Tighten the nut that secures the front of the window to the window regulator (torque 9 Nm).
5. Reinstall all components that were removed for access.