Tesla Model X: Gas Strut - Hood - LH (Remove and Replace)

Tesla Model X 2015-2024 Service Manual / Closures / Gas Strut - Hood - LH (Remove and Replace)

Remove

Remove the LH underhood apron (refer to procedure).
Support the hood.
Release the bottom of the strut from the body of the vehicle.
Release the top of the strut from the hood.
Remove the strut from the vehicle.

Installation

Installation procedure is the reverse of removal.

SEE MORE:

Ride Height - Adjust

Setup Use Toolbox to verify that the "Wheel Type" vehicle configuration variable is correct. If necessary, change the vehicle configuration. Note: Changing the "Wheel Type" configuration variable affects the target calibration height. Position

Tweeter - Rear Door - LH (Remove and Replace)

Removal Remove the rear speaker grille (refer to procedure). Remove the rear door trim panel (refer to procedure). Disconnect the electrical connector from the bottom of the tweeter. Note: Components have been removed in this graphic to aid clarity.